Reno V. Koray free essay sample

Analyzes the 1995 ruling on whether a man ordered to stay at treatment center should be given credit for time served. This paper will analyze Reno v. Koray. The paper will give an overview of the facts and the legal disputes which the District Court sought to resolve and explain why the Court of Appeals reversed the lower court. This paper will then summarize the three opinions of the case. Finally, the paper will take a stand on the case and use convincing arguments and an analysis of constitutional issues to support its position. Zeno Koray was arrested for money laundering, a violation of federal law, in 1991. He was tried in Maryland, where he pled guilty to the charge in front of a U. S. District judge. A federal magistrate then ordered Koray to be released on bail pursuant to the Bail Reform Act of 1984, whereafter he was confined to a treatment center. We will write a custom essay sample on Reno V. Koray or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page  The issue which the District Court had to decide was whether Korays stay at the center could..

Free Essays on The Role Of Recording Studio Technology

Studio technology has developed drastically over the years and has become ever more vital to the record producer within the music industry. Different producers make use of studio technology in different ways, often depending on the style of music that they are producing, their preferred method of production and the band’s preference of sound. The development of recording technology has run parallel to a reorientation in popular music production. The goal of getting a good sound is no different now than it was when the first recordings were made, but the idea of what a good sound is and how it should be achieved are radically different. The role of the recording producer in popular music is very important; the producer plays a very big part in the realisation of a composition by deciding what technology should be used and how to use it. Interplay between the musician, record producer and engineer is critical to the recording process. However, what is eventually fixed to tape must first be composed around the limitations of the available technology. Thus the most direct interactions between music and technology occur during composition and realisation. There are a number of record producers who have become famous for their distinctive sound and their particular techniques and application of varied developments of studio technology. Some producers take much advantage of the technology available to them, whilst others seem to prefer to employ more classical techniques of record production, tending to shy away from the increasing practise of digital studio technology. Ross Robinson, well known for producing ‘nu-metal’ bands such as ‘Korn’, ‘Deftones’, ‘Limp Bizkit’ and ‘Soulfly’, generates his own distinctive sound. Robinson focuses more on capturing the soul and spirit of the music that he produces. He does this by resisting the use of digital technology and continuing to use ana... Free Essays on The Role Of Recording Studio Technology Free Essays on The Role Of Recording Studio Technology Studio technology has developed drastically over the years and has become ever more vital to the record producer within the music industry. Different producers make use of studio technology in different ways, often depending on the style of music that they are producing, their preferred method of production and the band’s preference of sound. The development of recording technology has run parallel to a reorientation in popular music production. The goal of getting a good sound is no different now than it was when the first recordings were made, but the idea of what a good sound is and how it should be achieved are radically different. The role of the recording producer in popular music is very important; the producer plays a very big part in the realisation of a composition by deciding what technology should be used and how to use it. Interplay between the musician, record producer and engineer is critical to the recording process. However, what is eventually fixed to tape must first be composed around the limitations of the available technology. Thus the most direct interactions between music and technology occur during composition and realisation. There are a number of record producers who have become famous for their distinctive sound and their particular techniques and application of varied developments of studio technology. Some producers take much advantage of the technology available to them, whilst others seem to prefer to employ more classical techniques of record production, tending to shy away from the increasing practise of digital studio technology. Ross Robinson, well known for producing ‘nu-metal’ bands such as ‘Korn’, ‘Deftones’, ‘Limp Bizkit’ and ‘Soulfly’, generates his own distinctive sound. Robinson focuses more on capturing the soul and spirit of the music that he produces. He does this by resisting the use of digital technology and continuing to use ana...

Causes And Effects Of Earthquakes Engineering Essay

Causes And Effects Of Earthquakes Engineering Essay Earthquakes are one of the most destructive mother-nature disasters in the world. An earthquake is defined as quake or tremor which there will be a slipping or movement of earth`s crust as a result of a sudden release of energy, accompanied and followed by a series of vibration on the ground that causing damages. The series of vibrations is known as seismic waves and can be measured using seismometer, a device which also records the seismic waves known as seismograph. This disaster may happen naturally or caused by human activities and very difficult to predict (Wikipedia, 2009). Earthquake can be grouped into three categories based on the depth of their foci that are shallow focus (300 km) Geological faults, volcanic activity, landslides, mine blasts and nuclear experiments will caused an earthquake. Strong earthquakes can cause severe damages and great loss of life in several ways, including fault rupture, tremors flood caused by tsunami and landslides. Earthquakes are generated b y either tectonic activity, the movement of large rock plates which underlay the earth’s surface, or volcanic activity (GEO.101-02, 2006). The areas that experienced the most active seismic are related with the plate tectonics that located on the ground. When the plate tectonics tend to moved, there will be faults that may be detectable on the ground surface, but they are often out of sight below layers of soil deposits. There is about 90 percent of the earthquakes case worldwide which occur at faults along the boundaries of earth`s major crustal plates. Deformation will occurred which resulted from the movement of tectonic plate. The type of deformation that takes place during earthquake generally occurs along zones where rocks fracture to produce faults that cause tremors (Stephen A.N, 2010). The faults will cause a stresses that form a movements of adjacent plates therefore energy will released. Within the earth rocks are constantly subjected to forces that end to bend, tw ist, or to fracture them. When rocks bend, twist or fracture they said to be deformed or strain. This deformations are the energy that been released from the fracture. The energy released in the form of ground shaking will result of tremors and trembling of the ground (NAHB Research Center, 1994). Figure 2.1 shows the location of earthquakes with different magnitude and depth. Figure 2.1 Locations of Earthquakes 2.2 Causes of Earthquake Earthquakes are caused by the sudden release of energy along faults plane. The strain that builds up in the rock will ruptures when the elastic limit of the rock is exceeded thus released the elastic energy as seismic waves. The greater released energy, the greater strain that stored in the rock. A sort of the energy that released by and earthquake will travels through the earth`s crust which caused damages to life and structures. The earthquakes can be even smaller and even larger (W.Spence, S.A.Sipkin, & George L. C, 1989). Earthquakes are three di mensional events which the waves will move outwards, horizontal and vertical plains. This condition produces three different types of waves which can be defined through its distinct behavior and some of this wave only travel through certain stratums within the earth. The three forms of these shockwaves that cause an earthquake are (Geography Sites, 2006):

Find article themes, analyze, critique, synthesize and write a Essay

Find article themes, analyze, critique, synthesize and write a conclusion - Essay Example Another theme in the readings, developed through March and Olsen is institutionalism, which the authors define as a study of political entities and their relationships, through theoretical concepts and formulated hypotheses (2005). Institutionalization establishes constraints within which actors in an economic system (Ingram and Silverman, 2002). Closely related to these themes is the theme of susceptible governance whose remedy is an extensive network through â€Å"collaboration† and â€Å"performance management systems† (Imperial, 2004, p. 4). The theme is evident among practitioners as they seek to achieve better governance in an environment that experience forces from both public and private sectors. Significance of relationships between members of the networks through mutual benefit is another theme that the readings establish through Stephenson’s article (n.d.) and Milward support through his proposed guide to manager’s selection and application of c ollaborative networks (2006). Virtual networks through technology promote the networking (Alstyne 1997). The theme of economic governance is also significant in the readings and is developed through Mintzberg’s article (1996). ... The concept of market failure is a tool to government’s intervention in the economy but its validity and application is questioned. While the market failure concept initially guided government’s point of intervention to regulate the economy, its role diversified to determination of intervention strategies while little attention has been paid to the concept’s validity and empirical and theoretical background into the concept do not exist. Existence of discrepancies, contrary to expectations under mixed market in which forced interact to ensure efficient resource allocation, shows that the market failure concept has failed. Government’s efforts to use the concepts towards resource allocation and optimization of social benefits have also failed and this discredits validity of the concept as applied by the government. Regulations towards environmental conservation such as taxes to curtail excessive pollution have for instance failed to identify inadequacy of t he market failure concept (Vogel, 2009). Existence of externalities also challenges applicability of the market failure concept because it induces the need for a wider perspective to determining market failure (Tragakes, 2011). These challenges to the market failure concept therefore supports the proposal that the concept is ineffective and are consistent with Zerbe and McCurdy’s perspective that the government misuses the concept to justify its intervention in the economy. The theme of unreasonable use of the market failure concept is also evident in the readings and while it offers a basis for criticizing governance, it does not disqualify the need for government intervention in the economy. This position is informed because the society expects government intervention to ensure fair

Create a new animal Assignment Example | Topics and Well Written Essays - 250 words

Create a new animal - Assignment Example The fins have strong muscles that can break the jaw of man and other strong animals like a dog and this means it can scare away several water mammals. The most outstanding feature in this animal is its strong jaws with three pairs of chisel shaped incisors and a row of corrugated molars and premolars. It can tear the strongest and thickest flesh in any animal as it is more of a carnivore. Its mode of attacking its prey which is big fish and other water mammals is very ferocious and gruesome as it ruthlessly tears them and maim within two contacts. This means that it has to kill the prey within the first furious three bites and eats it away slowly. The funny thing about this animal is that it cannot eat carcass that has been there for more than six hours .The water bear is a unique creature with high level of intelligence that can sense impending danger two kilometers away and prepare for a reaction. It is the only water animal that hisses like a snake and can stay underwater for more than thirty minutes yet it breathes using lungs. It is an experience watching this wonder of the

Online Shopping Essay Example for Free

Online Shopping Essay It won’t be a wrong thing to say that the present world is a digital world where the world is shrinking day by day on the screen of the Smartphone. People spend a lot more time on internet for fun and work and even now prefer to shop online. But there is a group which prefers to shop from the physical stores. What is your view? Is shopping online a better idea in today’s world? Read more:  Online Shopping Disadvantages Yes:- †¢ It is a boon for working people who hardly find any time from the busy schedule to go out and visit the physical outlets for shopping. †¢ It is just not about buying the luxuries online but now it is a platform where people look to order for groceries and other essential products required in daily life. †¢ There is a great flexibility to compare the prices when you shop online. You can visit the different websites and can then choose the best deal. †¢ There is no time restriction when it comes to shopping online. No matter where you are at the home or in office, you can buy from anywhere and anytime. †¢ When you shop online you can go through the customer reviews to get the idea about the utility and quality of the product. †¢ There is no headache to deal with the sales people who stay after you and pressurize you to buy products in the physical stores. †¢ With the help of online shopping it has becomes easier for the people to buy gifts and flowers and send them to their loved ones on special occasions. No :- †¢ The first problem definitely is of quality. You cannot touch and see the products before you buy them. †¢ Online shopping always comes with the risk of insecure online payment and the fraudulent sites claiming to sell genuine products. †¢ When you buy anything online then there is the compulsion to wait for the products for some days. You cannot get the delivery at the same time. †¢ The greatest headache in online shopping is of return policies. The return policies are not at all buyer’s friendly. Moreover it is a long and complex procedure. †¢ People are getting addicted to internet for their each and every need. If they won’t step out of the home for the simple thing like shopping also then they are at a higher risk of confining themselves to the virtual world. †¢ When you shop online then you have to pay extra as shipping costs. Sometimes the cost of the product is less than the shipping costs. Conclusion:- The coin has two sides head and tail, life has two phases good and bad, everything has its own sets of advantages and disadvantages. The only thing is that be sensible in whatever mode of shopping you use. If you do then online or physical, all are fine.

Henry Ford :: essays research papers

The Success of a Man   Ã‚  Ã‚  Ã‚  Ã‚  To say that Henry Ford dilly-dallied around before finally establishing a serious car company would be invalid. The 40 year old man had been acquiring valuable knowledge regarding business, engines, management, and most importantly cars. Now it was time to take a leap of faith.   Ã‚  Ã‚  Ã‚  Ã‚  In 1903 the Ford Motor Company came to be. Ford, along with other investors including John and Horace Dodge raised $28,000 and in the first 15 months produced 1700 Model A cars. These cars were known for their reliability, yet were still too expensive for the average American. Over the next five years Ford and his engineers produced models with the letters B through S, the most successful of which was the Model N (priced at $500) , and the least successful was the Model K (priced at $2500). It was obvious from the Model N that the key to the companies success lay in inexpensive cars for a mass market. The answer that Ford and the American consumer were looking for was the Model T.   Ã‚  Ã‚  Ã‚  Ã‚  The Model T, a small, sturdy four-cylinder car with an attractive design and a top speed of 45 mph, hit the market in 1908. It’s success came from it’s attractive price, at $850, and more than 10,000 were sold in the first year alone. It was easy to operate, maintain, handle on rough roads, and immediately became a success. Along with success came expansion, and in 1910 he established another assembly plant in Highland Park, Michigan. Through interchangeable parts, standard manufacturing, and a division labor, the demand greatly increased for the Model T. It was at this time in 1913 that Ford introduced the assembly line and forever changed our economy, our industry, and our culture.   Ã‚  Ã‚  Ã‚  Ã‚  Ford’s concept of an assembly line sprang from the thought that a car could be produced much quicker if each person did one, single task. He applied this in his Highland Park plant, and cut down production time of one Model T to a fraction on the time. The carefully timed pace of a conveyer belt moving the parts along further speeded the process. With these new tactics, a factory could produce 40%-60% more cars per month. By late 1913 he had established assembly plants in Canada, Europe, Australia, South America, and Japan. At this point, the Ford Motor Company was the largest manufacturer of cars in the world.

Body Language in Business Communication

Body Language in Business Communication Body language is a non verbal form of communication that is widely used by people in everyday environment. Alone, or in conjunction with the words, body language has a big influence on how we communicate to others. In business world it can cause both positive and negative results in communication. If used properly, body language can help create a friendly atmosphere in any conversation and can significantly enhance your verbal message. It can help win the interview, make a sale, give a successful presentation and profit from business negotiations. Therefore, today’s businesspeople more and more some time studying the different forms of the body language to achieve the maximum positive influence on people. They also do it, so they can better understand people around them as well. Body language is defined as everything what can be communicated without or in addition to words: facial expressions, physical movements (gestures), posture or silent actions. The study by UCLA (University of California in Los Angeles) showed, that words account for only 7% of the messages person conveys. The remaining 93% are non-verbal factors. As Lidia Ramse, business etiquette expert says: â€Å"In the business setting, people can see what you are not saying. If your body language doesn't match your words, you are wasting your time. † (The Sideroad: Body Language in Business by Lidia Ramse) In fact, psychologists divide body language in two categories: intentional and unintentional (subconscious). We cannot always verbally express what we feel, so our body language does it for us. At the same time, we can use our body language intentionally to express something without saying a word. It is good to understand that our body language can be also interpreted subconsciously as well. As people do not always pay close attention to what we do, certain actions can trigger a formulation of certain opinion about person. Mary-Lo use Angoujard, CEO and Founder of Rapporta Limited, gives a good example of the person, whose arms folded across the body, head down, stiff torso, hunched shoulders and crossed legs. She calls it â€Å"closed† body language that causes people think that this person is shy by nature, cold or ill or simply disagreeing strongly with something. (Raporta- Bringing Positive Energy to Business Communication) In addition to all above mentioned, nonverbal signals can suggest the attitude, understanding, empathy and ethics. That is why it is important to analyze and study your own body language and evaluate others’. Then you can learn how to use it in your own advantage and how to better understand your copartners to make your business communication process the most successful it can be. These are some tips on the most practical and common body language signals. Handshake Handshake is a form of gesture that is most commonly associated with greeting. Other common uses of it are starting the meeting, making an offer (deal) or completing an agreement. The main purpose of the handshake is to convey trust, balance and equality. In general handshake should be firm, full and supported by an eye contact. It can help convey your confidence and get a good start for further communication. Handshake can reveal your associate’s personality. The stronger the handshake the more aggressive or important the associate can be. Posture Standing tall and holding the head straight is not only a sign of a good posture. It can also show confidence, make the message come across easier and make it a subject of importance. Use of Personal Space Use of personal space is another important factor, but it is also culture oriented. Understanding of this term differs from one country to another. â€Å"For Western Europeans and Americans, a space of 14 to 16 inches is considered non-intrusive. But those from the U. K. might consider a distance of 24 inches to be more comfortable†, concludes Tatiana D. Helenius in her article about international business dealings (CNN. Money). As protocol and etiquette consultant Margaret DelVecchio said: â€Å"Awareness of the level of personal space required is crucial†¦. If not gauged properly, inappropriate proximity or distance can lead to misunderstandings and be interpreted as insult (CNN. Money). † It is also important to pay attention as to what stance your college has: is he sitting or standing? You should not take more space than other person does suggesting your bigger significance. In conclusion, it is important to mention that human body can produce over 700,000 unique movements. These movements have been divided into about 60 symbolic signals and around 60 gestures. Brenner Books: Body Language in Business). After careful examining of your own attitude you can choose and work on the most successful for the particular message body signals and correct unnecessary ones that caused you failure in the past. Nonverbal communication when coupled by good verbal skills together with knowledge of the mater ial and ethical behavior will have huge impact on others and bring successful results to any business. Works Cited Angoujard, Mary-Louise. â€Å"Is Your Body Talking Good Business? Body Language in Business – Sort it out and Communicate with Greater Impact. Rapporta – Bringing Positive Energy to Business Communication. Copyright 2006 Rapporta Ltd. Retrieved on 24 July, 2007 from: < http://rapporta. com/press07. htm> â€Å"Body Language Rules Biz Travel†. CNN. com/World. 8 July, 2003. Retrieved on 23 July, 2007 from: < http://edition. cnn. com/2003/WORLD/europe/07/08/biz. trav. body. language/index. html> Brenner, C. Robert. â€Å"Body Language in Business: How to Sell using Your Body! † BrennerBooks. com. Copyright 2001-2004, Brenner Information Group. 9 December 2004. Retrieved on 22 July, 2007 from: < http://www. brennerbooks. com/bodylang. tml> Helenius, D. Tatiana. â€Å"Body Language Savvy. † CNN Money. 2007 Cable News Network LP, LLLP. A Tim e Warner Company. 3 May, 2000. Retrieved on 22 July, 2007 from: < http://money. cnn. com/2000/05/03/career/q_body_language/> Morgan, Nick. â€Å"The Truth behind the Smile and Other Myths – When Body Language Lies. † HBS Working Knowledge. Vol. 5, No. 8, August 2002. Retrieved on 23 July, 2007 from: < http://hbswk. hbs. edu/archive/3123. html> Ramsey, Lidia. â€Å"Body Language in Business. † Sideboard. com. Blue Boulder Internet Publishing 2007. Retrieved on 23 July, 2007 from:

Impact of wireless communication devices and systems nowadays Essay

ABSTRACT Nowadays, wireless communication devices and systems have a huge impact on everyone. This project describes the performance of the 433MHz RF module for WSN applications. The system is built wirelessly where it can transmit and receive signals from DHT11 which is a temperature sensor and humidity. This 433MHz RF module is used to transmit and receive data from Arduino Pro, which is connected directly to the RF module and sensor modules. It also allows data packets to be moved remotely. There are other transmissions such as Wi-Fi, Zigbee, Bluetooth and others but the 433MHz RF module creates more flexibility in dealing with such problems. Therefore, the 433MHz RF module is selected to achieve the goal of the project as the RF module can handle the problem. Additionally, the transferred data will also be sent and received without any loss of data in the barrier or in a line of sight. These projects should examine the distance and performance of the 433MHz RF module. ABSTRAK Pada masa kini, peranti dan sistem komunikasi tanpa wayar mempunyai impak yang sangat besar kepada semua orang. Projek ini menerangkan tentang prestasi modul RF 433MHz untuk aplikasi WSN. Sistem ini dibina secara wayarles dimana ianya boleh menghantar dan menerima isyarat dari DHT11 yang merupakan sensor suhu dan kelembapan. Modul RF 433MHz ini digunakan untuk menghantar dan menerima data dari Arduino Pro, yang disambungkan secara langsung dengan peranti modul RF dan sensor. Ia juga membenarkan paket data yang diperlukan untuk dipindahkan dengan jarak jauh. terdapat jugak penghantaran lain seperti Wi-Fi, Zigbee, Bluetooth dan lain-lain lagi tetapi modul 433MHz RF mencipta lebih banyak fleksibiliti dalam menangani masalah seperti ini. Oleh sebab itu, 433MHz RF modul dipilih untuk mencapai matlamat projek ini kerana modul RF dapat menangani masalah tersebut. Selain itu, data yang telah dipindahkan juga akan dihantar dan diterima tanpa ada sebarang kehilangan data di dalam halangan mahu pun garis penglihatan. Projek-projek ini perlu mengkaji mengenai jarak dan prestasi modul RF 433MHz. DEDICATION To my beloved parents, thank you for the support, encouragement, and understanding from both of you, Mukhtar Bin Baharom and Rahmah Binti Yunus. This work is dedicated to them. Acknowledgment Thanks to Allah S.W.T for his blessing and mercy for giving me the strength to complete my task that given in Final Year Project. However, it is impossible for me to complete this project without help and support from anybody. So, I would like to thank you for all of them. I would like to express my deep gratitude to my supervisor, Mr. Mohd Khanapiah Bin Nor for guiding me to complete this project. He was giving me necessary information regarding the project and a lot of inspiring ideas. My appreciation also gives to my beloved parents, family members, and friends who have been behind me throughout this project for the encouragement and supported from them. I really appreciate all their help and support while I’m completing this project. Lastly, I would like to sincerely thank Universiti Teknikal Malaysia Melaka (UTeM) for providing the facilities and equipment for me to complete my project. In the previous era, the technology application mostly using wire but now a wireless device has become commonplace. The wireless sensor network can be defined as an application that having no wires connection on that devices. In addition, to make the system easy to monitor from a distant location, the RF 433MHz module was used. So, this project gives the idea for studying details about the RF 433MHz module performance for WSN application. 1.1 Project Background Nowadays, using the wireless sensor network (WSN) technology to monitor the environment helps someone to solve the problems of deployment difficulty, high cost, and realized unmanned monitoring which is mostly used in a factory, buildings, laboratory, and house. This project is to study the range and performance of the RF 433MHz module for WSN application. RF 433MHz module is popularly used in the remote control system. This range also available to use in this area. There are two types of the RF module which is transmitter and receiver. From research, using RF 433MHz module, the data can get more accurately without any data losses with the range that given than compared to another transmission for the wireless sensor network. The range that can reach by this RF module is different between outside and inside area. For inside area, it can work for 50 meters through multiple walls with an antenna, while for the outside area, it will be able for hundreds of meters. Besides that, a microcontroller such as Arduino also used in this project. Arduino that available for this project is Arduino PRO which is it has 3.3V port that will be easier to connect directly to the types of RF 433MHz module that used in this project. This project also will be studied the analysis of the data transmission by giving a few of distance between the transmitter and receiver of the RF 433MHz modules when located in the obstacles or line of sight area. Then, the data that are received will be displayed on the computer whether there are data losses or not. The problem that becoming as issues right now is there is a lot of ways to send data but the problem is about the range, cost, and data losses. So, for this situation, study the performance of RF 433MHz can overcome the problem for the WSN application. The objectives of this project are to understand the range and performance of RF 433MHz module. Moreover, exploration about the transmitting and receiving the data by using the RF 433MHz module. The main work scope of this project is to make sure this project will achieve the objectives. The main focus of this project:- i. To study and understanding the range of RF 433MHz module. ii. To transfer data by using RF 433MHz module. 1.5 Methodology In this project, there is three part that needs to follow. For the first part, it will be focused on the conducting the literature review and do some research more detail about the RF 433MHz module. Meanwhile, for the second part, after the software development process, the hardware development process will take over and include the testing of the project. Last part, when the hardware and software complete their part, it will be followed by testing the performance and the operation of the project to make an analysis. The methodology is the explanation of the procedures or steps when doing this project. The simulation, analysis, and evaluation of the project. A literature review is an important step before proceeding to the project. Collecting all the required information about the 433MHz RF module from the books, journals, and website. The literature review also can provide a useful information to complete the project. The idea for this project comes from the problem faced when the data that have been transmitted becomes losses with the range that provided. In this chapter, it will be explained more details about the project and also the components that will be used in this project. The frequency of 433MHz that used in the wireless sensor network can test the sending and receive the data for this range without any data losses. 433MHz RF modules required the 17cm of the antenna to support the range to send the data. The range is one of the most important parameters of any wireless system which is it defined how the transmitter and receiver can be apart from each other to send the data. A range of the outside with few obstacles the data can go through hundreds of meters. While for the indoor, the data can go over 50 meters through multiple walls. The external antenna will be soldering to the â€Å"ANT† on the transmitter to get more range which is 17cm of the length of the antenna that was used. Regarding the several research that I have done from a few of journals that can relate to my project. Wireless sensor networks are currently widely used in several of monitoring and control applications. Guohua Yang and Kui Zhang (2015) have conducted a project regarding the 433MHz radio for long-range communication. They present about the connectivity, range of the communication and packet loss ratio that have been performed in the indoor and outdoor environment. The Maarten Weyn and Glenn Ergeerts (2013) conducted the survey of the DASH7 Alliance Protocol for wireless sensor network (WSN). In this research, it stated that 433MHz is an unlicensed band. They said that, due to the frequency, it has a better propagation characteristic opposed to the higher frequency. The wavelength at the center of frequency is 69.14cm which is the bandwidth for the frequency is 1.84MHz. This limits the data rate of the communication at this frequency 433MHz is an ideal for low power of low data rate communication. Budi Setiyono, Sumardi, and Rafdito Harisuryo (2015) have conducted a project on measurement system of temperature, humidity and air pressure over 433MHz radio frequency for an application on a quadrotor. They using the telemetry system which is the measurement process of data at a certain distance. Then, they stated that data will be processed or analyzed by the receiving station. They stated on their result which is for successful transmission, the amount of data that received will be same as the amount of data that have been sent. This project is to improve the data transmission with 433MHz RF modules either in obstacles or line of sight condition. The 433MHz RF modules are categorized as the lower cost, lower power consumption and the most important is when the longer the distance for data that transmit remains accurate when it received by the receiver. In theoretical, the success of data transmission is the amount of data received will be same as the data that have been sent. That means there are no data losses when the transmission occurred. Radio Frequency (RF) is a rate in the range of around at 3 kHz to 300GHz which is corresponding to the frequency of radio waves, and the alternating current that can carry the radio signals. ITU bandstand for International Telecommunication Union that defined for the electromagnetic frequencies that used for radar and radio. The best set of terms for frequencies used in communication. While the very lowest bands have no radar applications. The table below shows the frequency range and ITU band. The Arduino Pro is a microcontroller board based on the ATmega328. This microcontroller is an open-source hardware and software. The version that used in this project is 3.3V/8MHz. This version can be powered by a battery or external power supply. It has 14 digital inputs and output pins which is 6 of it can be used as PWM output, another 6 pins for the analog input, battery power jack, an ICSP header and reset button. Arduino Pro needs to connect with FTDI cable through six pins header to provide the USB power and have a communication with the board. Arduino Pro has the port for 3.3V that can supply the voltage for the transceiver. Each of the 14 digital pins on the Arduino Pro can be used as an input and output which is operated at 3.3V. Each of the pins can provide or receive a maximum of 40mA and has internal pull-up resistor (disconnect by default) of 20 until 50 kohm. The ATmega328 has 32KB and running 8MHz of the external resonator. It also has 2KB of SRAM and 1KB of EEPROM that can read and written with the EEPROM library. The operation of the Arduino microcontroller is based on the connection made on the pins. The application can be done by using the Arduino software where Arduino function can be edited according to the applications in this software. This software can work on by using the C or C++ language. The program that has been creating the need to upload to the microcontroller by using the USB cable. If there is an error detected on the program, it will be adjusted by editing to make a correction on the process and then the program needs to reload again. Other than that, there is another option which is using the reset button to delete all the previous program that have been upload before this to make it clear then built again. MHz RF Module version that has been used. It is because can operates in the unlicensed ISM (Industry Science and Medicine) radio band. It’s available for use in the inexpensive area for short-range wireless networks of sensors. This types can operate on the 433MHz frequency and can capable of transmitting at up to 100mW and up to 300kbps. When increasing the transmit power and reducing the data rate it can maximize the range of the 433MHz. DHT11 is a digital temperature and humidity sensor. Its suitable for my project that only needs to read the data about the temperature and humidity only. Micro-B is the smallest USB connector type. This type also used for the android as a cable for charging while USB port A is that can connect to PC or laptop. This USB cable needs to connect the RF transceiver module with the Arduino Pro at the transmitter and receiver. Using this board because the standard FTDI board cannot supply the enough current to run the RFM69 433MHz RF Modules. The difference between standard FTDI and Beefy 3 FTDI is the current that can provide which is standard FTDI provide 50mA while Beefy 3 FTDI provides up to 500mA. This chapter will be discussed the procedures and steps that used in this project. Each of the methods that were used to achieve this project will be stated and explain briefly. The purpose of the methodology is used to achieve the objective that has been stated. 3.1 Software Design In this part, the software design is part to do the programming by using the Arduino software. The flow of the data transmission starting from the reading of the temperature and humidity by using the DHT11 sensor. Then, the data will be processed by a microcontroller. It will be sent through the transmission of data by using the 433MHz RF transmitter module. When the power supply is turned on, the 433MHz RF receiver module and the microcontroller ready to accept the data that have been transmitted. After that, the data is sent by the Arduino microcontroller via a serial port to the computer for displaying the data. Based on Figure 1 and Figure 2 it showed the flow how it works. Hardware design consists of two parts which are from here it will be explained how the flow of the project will be complete. For the first part as shown in Figure 3.3 is the data obtain from the DHT11 sensor reading, then the data will be transmitted by the 433MHz RF transmitter modules. While for the second part as shown in Figure 3.4 is the data received via 433MHz RF receiver modules then sent by the Arduino PRO that connected to a computer for display. The generated data for this project should be the same with the theoretical results. Besides that, the results of this project will be compared with the theoretical results, the journals or book that have been found.

Contemporary Issues in Global Business Management An analysis the business strategy of Nike Incorporation

Contemporary Issues in Global Business Management An analysis the business strategy of Nike Incorporation Introduction Nike Incorporation has been successful in designing, developing and marketing diverse products such as apparels, footwear and other accessories. In its operation, the firm contracts manufacturing of most of its products to firms which are located overseas. This has enabled the firm to attain a high bargaining power over its suppliers (Lussier Kimball, 2009, p. 90).Advertising We will write a custom report sample on Contemporary Issues in Global Business Management: An analysis the business strategy of Nike Incorporation specifically for you for only $16.05 $11/page Learn More The firm has effectively positioned itself in marketing its products on a global scale. In the United States, the firm has established a strong distribution network through a number of retail outlets. For example, the firm runs approximately 20,000 retail accounts around the 110 countries in which it operates. Most of the firm’s products such as bags, bats, gloves, sports wear and other sports equipment are marketed under the Nike brand name. Nikes success can be attributed to its efficiency in implementing its internationalization strategy. Findings of a study of 132 organizations conducted by Veronica Wong and Professor Peter Doyle in 1998 revealed that marketing is one of the core drivers in the performance of business entities (Blythe, Coxhead, Lashwood, Partridge, Reed Simms, n.d, p.23). The American Marketing Association (AMA) defines marketing as the process which involves a number of elements such as planning, execution, promotion, pricing and distribution of the ideas conceived. Marketing is made up of a number of components such as product development. In addition, marketing must ensure that the businesses’ and customers’ needs are met. Finally, marketing must result into creation of value between the two parties (the business and the customer). Marketing is therefore considered to be a highly invaluable business activ ity (Kaser Oelkers, 2007, p.4).This paper is aimed at illustrating the various marketing strategies adopted by Nike Incorporation. Industry analysis The United States apparels industry is relatively large. In addition, the industry is in its maturity stage which is evident by the slow growth rate and a high level of fragmentation. Demand for apparels in the US is satisfied by both domestic and international markets. Similarly, the US footwear industry has experienced a significant growth over the past few years as a result of growth in demand.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More This has led into the industry reaching its maturity stage. In addition, the market has become very saturated. One of the reasons to explain this is the rise in intensity of competition. Some of the firm’s core competitors include the recently formed Addidas-Reebok merger, PUMA, Under Armour, Fila and New Balance Athletic. All these firms specialize in the production of sportswear. The global apparel and footwear market has become flooded with various sportswear brands. This has culminated into an increment in the consumer bargaining power. Consumers can easily switch from one product to another (Lussier Kimball, 2009, p. 90). However, the firm’s current strategy has enabled it to attain an effective market position. The firm has been able to create a relatively high level of customer loyalty. As a result, Nike Incorporation continues to lead in the footwear and apparel industry. In an effort to enhance its competitiveness, Nike Incorporation management team diversified its operations into the golf industry. This was achieved through the signing Tiger Woods who is a renowned golf personality as its spokesperson (Lussier Kimball, 2009, p.92). Competitive advantage Attaining competitive advantage is one of the ways through which a firm can be able to succe ed in the long term as a going concern entity. According to Lussier and Kimball (2009, p.93), competitive advantage entails how a firm delivers unique value to its customers. In addition, competitive advantage is aimed at making a firm distinct from its competitors by enhancing its core competency. According to Porter (1998, p.70), there are three main strategies which a firm can incorporate in order to attain competitive advantage. These strategies include cost leadership, differentiation and focus strategy. Cost leadership entails ensuring that a firm becomes the leader with regard to low cost production. As a result, the firm is able to attain price competiveness by selling its products or services at a low price point compared to its competitors. On the other hand, differentiation entails production of unique products which are highly appreciated by the customers.Advertising We will write a custom report sample on Contemporary Issues in Global Business Management: An ana lysis the business strategy of Nike Incorporation specifically for you for only $16.05 $11/page Learn More There are various aspects which a firm can incorporate in an effort to differentiate its products. These include the product, sales, image, distribution and marketing. Focus strategy entails a firm being committed to be the best with regard to a particular product segment. Over the years it has been in operation, Nike’s Incorporation management teams have appreciated the importance of developing the firm’s competitive advantage. In order to achieve this, the management team incorporated the concept of product differentiation. The resultant effect is that the firm has managed to develop strong brand recognition by ensuring development of high quality products. In addition, the firm has a strong research and development team which ensures that the products developed meet the market demand. Product differentiation is achieved through effective desig ning such as by ensuring that the products such as the shoes are of different color. The high quality of the firm’s products has enhanced its reputation on a global scale. As a result, Nike as a brand name and the Swoosh logo has increasingly been recognized as status symbols globally. As a result, the firm has been able to increase its sales significantly (Porter, 1998,p. 72). The table below illustrates a competitive profile matrix comparing the firm’s competitiveness with some of its core competitors on the basis of quality of its product, marketing strength and price. A weighted scale of 10 is used. Critical success Nike Under Addidas- factor Armour Reebok Quality 5 5 5 Marketing 2.5 2 2 Price 2.25 2 2.25 Total 9.75 9 9.25 From the table above, it is evident that the Addidas-Reebok merger is likely to pose a threat to the firm’s competitive advantage. This arises from the fact that the merger has culminated into creation of a relatively strong competitor. In an effort to remain competitive, the firm’s management team has incorporated the concept of continuous product improvement. To be effective, Nike Incorporation conducts continuous market research in so as to develop a product which meets the customers’ requirements. In addition, the firm has incorporated emerging technologies in an effort to improve the quality of its footwear, apparel and other equipments. The management team has also appreciated the importance of creating effective market awareness. One of the ways through which the firm achieves this is by integration of creative marketing campaigns. For example, the firm’s advertisements are a part of the pop culture.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Its campaigns feature prominent personalities such as Michael Jordan, Bo Jackson and Tiger Woods (Robert, Lussier and Kimball, 2009, p. 92). Through these strategies, the firm has managed to develop a strong competitive advantage thus being effectively positioned in the market. Pestle Analysis In order to determine the existing market potential, it is vital for Nike Incorporation to consider evaluating macro environmental factors. One of the ways through which the management can achieve this is by conducting a PESTLE analysis (Worthington Britton, 2006). Political Analysis According to Campbell and Craig (2005, p.123), the actions taken by the political institutions through formulation and implementation of various policies can have significant effect on the operation of businesses. In an effort to ensure continued economic growth, the US government has relentlessly ensured that there is a stable political environment. The US government has formulated policies which enable Nike Inc orporation to effectively produce and market its products. One of the ways through which the US government supports Nike Incorporation is by ensuring stable macro economic environment by advocating low interest rates, creating an environment which promote international competitiveness through an effective and efficient tax system and ensuring currency stability. This has culminated into formation of a foundation conducive to Nike’s growth. In addition, the US government is committed at forming trading blocs with neighboring countries through economic integration. Some of the countries the US is considering include South Korea, Panama and Colombia. The economic integration is aimed at boosting the country’s apparel and footwear industry. Economic Analysis Over the past few years, the US has experienced a relatively high rate of economic growth. This led to an increment in the citizens’ disposable income and hence their purchasing power. However, the occurrence of the 2007 economic recession adversely affected the country’s rate of economic growth. The recession affected various economic sectors including the apparels and footwear industry. In an effort to minimize the effects of the recession, organizations adopted various strategies such as laying of public relation campaigns which the firm utilizes include organizing fashion shows which are aimed at displaying the latest product offering. The firm’s decision to incorporate celebrities such as Tiger Woods has also played a significant role towards improvement of the brand’s value. In addition, endorsement of the firm’s brand by celebrities has also contributed towards creation of brand loyalty. For example, by wearing the firms’ clothes and designs, a firm’s brand can be improved significantly. This arises from the fact that consumers intend to associate themselves with successful individuals. In addition, firm also uses celebrities in their advert isement campaigns such as when promoting a specific product. Considering the intensity of competition, Nike Incorporation has adopted emerging Information Communication Technologies (ICT). The core objective is to enhance increase the firm’s market share by increasing their market share. The firm has achieved this through incorporation of ecommerce. In marketing its products, the firm is increasingly utilizing the internet. Some of the internet technologies which the firm has incorporated include use of emerging social networking tools such as You Tube, wikis, blogs and Face book. Distribution strategy Product distribution is vital in a firm’s effort to ensure that it succeeds in the market (Kurtz, Mackenzie Snow, 2009, p. 57). A firm’s distribution strategy should ensure that the product can be easily accessed in the market. In marketing its products in the global market, Nike Incorporation has adopted a comprehensive product distribution strategy. The firm di stributes its product to large retailers such as supermarkets in the countries in which it operates. Supermarkets form one of the largest points through which the firm distributes its products. In addition the firm has established a number of distribution centers which ensure that the supermarkets are effectively stocked. The firm has also implemented a computerized point of sales program which enables the firm to track movement of inventories in the various distribution outlets. As a result, the firm is able to restock the stores more effectively. The role of marketing strategy Through its differentiation strategy, Nike Incorporation is able to able to position itself more effectively in the market. According to Lussier and Kimball (2009, p.90), attaining an effective market position is one of the defensive strategies that a firm can utilize. The firm’s Swoosh mark is one of the core selling features. This means that there is a high probability of the firm improving its sale s revenue and hence its profitability level. In addition, adoption of the differentiation strategy will contribute towards the firm’s product being unique. The uniqueness of the firm’s products will contribute towards a large number of consumers considering purchasing the products relative to those of the competitors. In addition, product differentiation will enable the firm to address the diverse market needs (Morrison, 2006, p. 65). Through its market research activities, the firm will be able to undertake effective product development. In addition, the firm will be able to develop a high level of customer satisfaction by integrating the customers’ needs in the process of developing new products. This illustrates that there is a high probability of the firm increasing the size of its global market share. For differentiation strategy to be well undertaken, the firm will be required to conduct continuous market research (Brooks, Weatherston Wilkinson, 2004, p.5 4). This means that the firm will be able to understand the changes in the global market. The resultant effect is that the management team will be effective in the planning process hence its ability to address future changes. In addition, product differentiation strategy will enable the firm to target the market more effectively. Conclusion From the analysis above, it is evident that Nike Incorporation has been very successful. This has resulted from its efficiency in formulating and implementing operational strategies. Additionally, the external environment has also provided an environment conducive for Nike’s operation. To be successful in the long term, Nike Incorporation should continuously adopt global strategies in its operations. This will contribute towards the firm attaining a high market share and at the same time retain its leadership. However, the firm’s management team should act locally in the various markets it penetrates. This will contribute towards th e firm’s products being widely accepted in the market. Reference List Baron, D.P., 2005. Business and its environment. New York: Prentice Hall. Blythe, J., Coxhead, H., Lashwood, M., Partridge, L., Reed, P. Simms, H., n.d.  Strategic marketing. London: Select Knowledge Limited. Brooks, I., Weatherston, J. Wilkinson, G., 2004. The international business  environment. London: FT Prentice Hall. Campbell, D. Craig, T., 2005. Organisations and the business environment.  New York: Butterworh – Heinemann. Kaser, K. Oelkers, D., 2007. Sports and entertainment marketing. New York: Cengage Learning. Koekemoer, L. Bird, S. 2004. Marketing communications. New York: Juta and Company Limited. Kurtz, D., MacKenzie, H. Snow, K., 2009. Contemporary marketing. New York: Cengage Learning. Lamb, C., Hair, J. McDaniel, C., 2008. Marketing. New York: Cengage Learning. Lussier, R. Kimball, D., 2009. Applied sport management skills. New York: Human Kinetics. Morrison, J., 2006. international business environment: global and local  marketplaces in a changing world: the international business environment.  London: Palgrave Macmillan. Porter, M., 1998. Competitive advantage: creating and sustaining superior performance:  with a new introduction. New York: Simon and Schuster. Public Policy and Advocacy. n.d. Taxation and intellectual property rights. Web. The New York Times. 2009. In recession, Nike is likely to cut marketing. Web. Worthington, I., Britton, C. 2006. The business environment. New York. Prentice Hall.

Hooked on Credit Cards, Watson Essay Example | Topics and Well Written Essays - 250 words

Hooked on Credit Cards, Watson - Essay Example e was evaluated in terms of requiring strict adherence to grammatical rules that include using formal sentence structures, observing consistency in use of pronouns, and proper citations. Using these comments, Watson improved his arguments by incorporating noted information and revising, as required. One has had several opportunities to write different essays as required from various academic courses. As such, one has also had the chance to improve initial drafts through the use of peers’ feedback, as well as that of the instructor. The revision process is an effective step that helps one in becoming a more focused communicator through addressing the comments noted as seen from another person’s perspectives. With the basic theoretical knowledge gained on effective creative writing techniques, the writer is not expected to comply with all the essential elements and ingredients in one sitting. As such, constructive criticisms that aim to enhance the literary work are taken as effective means for improvement. As emphasized in Fountainhead Press (2009), â€Å"when you embark on revising, you focus your attention on the global characteristics or larger issues of writing—content, organization, and style† (p. 7). As such, the noted weaknesses should appropri ately be addressed and any errors on conformity to content, organization, and writing style must be corrected to ensure that one achieves the goals in writing and likewise, the training could extend addressing needed improvements as applicable to life. Fountainhead Press. (2009). The Writing Process:Drafting, Revising, and Editing. Retrieved August 19, 2012, from fountainheadpress.com:

Ethics in IT Systems Essay Example | Topics and Well Written Essays - 1500 words

Ethics in IT Systems - Essay Example An IT system, just like any other formal system, incorporates ethical, social, and political issues. Some of the ethical issues facing IT systems originate from political and social debates. Let us consider an example in order to understand the issues that concern an IT system. Let us visualize the society as a calm pond in summer time, reflecting a society at equilibrium with individuals and political and social institutions. The individuals in the society adhere to a given code of conduct developed by social institutions, like organizations, family, education, and enforced by the political institutions. In that calm society, let us now throw a stone inside the pond. The action will most definitely disturb the calm society. This stone is IT systems in the current society, and it sure does cause ripples. The individuals in the calm society face issues not covered by the social or political institutions. This conceptual model illustrates the current society and the continually develop ing IT systems. Results of such IT systems raise several moral issues of concern to the society, which include information rights and obligations, property rights and obligations, accountability and control, system quality, and quality of life.   Information rights and obligations concern the information in IT systems and possession power of the same by employees and the organizations. Questions like what the employees should protect, and their obligation and that of the company concerning the information fall under this moral category.